|
In mid 1988, Toyota
Australia released the Supra turbo, nearly 18 months after the initial
release of the non turbo variant. The early Turbo models sported the
Square engine insulator mounts with steel engine mounting brackets,
identical to those used on the non turbo Supras.
In mid 1989, the engine mounts and the engine insulators where changed to
the Alloy mounting units and round insulators, this is now obvious for the
planned engine update in Japan, which occurred at the start of 1990. This
was designated the JZA70.
|
|
Later model A70
cross member using round insulators with alloy mounts.
Below is the part
numbers for the mounts and insulators.
12311-88400 : Engine
mounting bracket, Right hand side.
12315-88400 : Engine mounting bracket, Left hand side.
12361-46040 : Engine mounting insulator (you will need 2 of these)
12381-42030 : Engine mounting stabiliser (you will need 2 of these) |
